SUPPORT - INTRODUCTION TO OUR TECHNOLOGIES

PRODUCT SUPPORT

JUMP TO SECTION:

®

dCSS® Technology
What is dCSS® Technology?
  • Satellite signal distribution using single cable

  • Perfect solution for multi-dwelling installation

  • Perfect solution for multi-tuner receivers

  • Up to max. 32 receivers in dynamic mode with access to all transponder on the satellite

  • Up to max. 32 transponders in static mode for unlimited number of receivers

  •  Auto-detection and auto-installation with dHello® feature

  • Significant decrease of the new installation costs by lower coax cable usage (up to 80%) (comparing to standard installation)

  • Easy adoption of old installation for increase of the number of users

  • Lowering labor time of new installation

  • Future-proof technology (reprogramming for adoption to the new transponder configuration)

 

®

dHELLO Technology
What is dHello®?
  • Dynamic DiSEqC protocol for dynamic UB allocation

  • Settings-free dCSS® receiver installation (plug-and-play)

  • Perfect solution for multi-tuner receivers

  • Up to 32 receivers on single coax cable in dynamic mode

  • Bidirectional communication over coax cable

  • Compliant to DiSEqC 2.0 receivers

  • Auto-detection and auto-installation

  • Lowering labor time of new installation

 

®

Fig. 1 - dConfigurator® Software

ADVANTAGES

GT-SAT
  • Satellite signal distribution using single cable

  • Up to 24 Receivers in Dynamic Mode with access to all transponders on satellite

  • Up to 32 Receivers in Static Mode with access to all transponders on satellite

  • Auto-detection and auto-installation with dHello® feature

  • Significant decrease of the new installation costs by lower coax cable usage (up to 80%)

  • Easy adoption of old installation to increase the number of users

  • Lowering time of new installation

  • Future-proof product (reprogramming LNB for adoption to new transponder configuration)

Pic 4.jpg

OUR                 :

4228.jpg

-    1 Input for terrestrial antenna (signal from LNB can be distributed along with terrestrial one)
-    1 dCSS® output
-    24 User Bands
-    Static and dynamic mode
-    Supporting EN50494, EN50607 and dHello DiSEqC protocols in dynamic mode
-    Up to 32 transponders in static mode
-    Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
-    Only 4.5W of power consumption
-    Very low Noise Figure (0.1 dB)

Title1.png
3625.jpg

-    1 Input for terrestrial antenna (signal from LNB can be distributed along with terrestrial one)
-    1 Hybrid output (legacy or dCSS®, switched on first DiSEqC command reception)
-    1 dCSS® output
-    32 User Bands (shared among 2 outputs)
-    Static and dynamic mode
-    Supporting EN50494, EN50607 and dHello® DiSEqC protocols in dynamic mode
-    Up to 32 transponders in static mode
-    Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
-    Only 4.5W of power consumption
-    Very low Noise Figure (0.1 dB)

Fig. 1 - dCSS® Mode

Fig. 2 - Legacy Mode

S1_Side.jpg
S2_Side.jpg

-    1 dCSS® output
-    1 (GT-S1dCSS24), 2 (GT-S2dCSS24) or 3 (GT-S3dCSS24) legacy outputs (for receivers not supporting dCSS®)
-    24 User Bands
-    Only dynamic mode
-    Supporting EN50494, EN50607 and dHello® DiSEqC protocols
-    Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
-    Very low Noise Figure (0.1 dB)

Fig. 1 - GT-S1dCSS24

Fig. 2 - GT-S2dCSS24

Fig. 3 - GT-S3dCSS24

-    1 dCSS® output only
-    24 User Bands
-    Only dynamic mode
-    Supporting EN50494, EN50607 and dHello® DiSEqC protocols
-    Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
-    Very low Noise Figure (0.1 dB)

Title1.png
GT-FR8A121.png

-    1 dCSS® output only

-    16 User Bands

-    Only dynamic mode

-    Non-programmable

-    Supporting EN50494 and EN50607 DiSEqC protocols

-    Compatible with Italy TV operator receivers

-    Very low Noise Figure (0.1 dB)

 

®

ADVANTAGES

  • Perfect solution for multi-dwelling installation

  • Up to 24 receivers in dynamic mode per output with access to all transponders on the satellite

  • Up to 32 transponders in static mode for unlimited number of receivers per output

  • Auto-detection and auto-installation with dHello® feature

  • Significant decrease of the new installation costs by lower coax cable usage (up to 80%)

  • Easy adoption of old installation for increase of the number of users and/or satellites

  • Distribution of 1 or 2 satellites using only 4 cables (no change in internal installation)

  • Lowering time of new installation

  • Future-proof product (reprogramming LNB for adoption to new transponder configuration)

Fig. 1 - dConfigurator® Software

OUR                                 :

5178.jpg

-    4 inputs for 1- or 2-satellite (Wide Band) configuration
-    1 Input for terrestrial antenna (signal from LNB can be distributed along with terrestrial one)
-    5 outputs for cascade connection
-    2 Hybrid output (legacy or dCSS®, switched on first DiSEqC command reception)
-    32 User Bands (shared among 2 outputs)
-    Static and dynamic mode
-    Supporting EN50494, EN50607 and dHello® DiSEqC protocols in dynamic mode
-    Up to 32 transponders in static mode
-    Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
-    Supplied from external Power Supply Unit

Title3.png
GT-SAT
Screenshot_97.png

-    4 inputs for 1- or 2-satellite (Wide Band) configuration
-    1 Input for terrestrial antenna (signal from LNB can be distributed along with terrestrial one)
-    5 outputs for cascade connection
-    4 Hybrid output (legacy or dCSS®, switched on first DiSEqC command reception)
-    64 User Bands (32 User Bands shared among 2 outputs)
-    Static and dynamic mode
-    Supporting EN50494, EN50607 and dHello® DiSEqC protocols in dynamic mode
-    Up to 32 transponders in static mode per 2 outputs
-    Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
-    Supplied from external Power Supply Unit

Title3.png
GT-SAT
4004.jpg

-    2 inputs for 1-satellite Wide Band configuration
-    1 Input for terrestrial antenna (signal from LNB can be distributed along with terrestrial one)
-    3 outputs for cascade connection
-    1 dCSS® output
-    24 User Bands
-    Static and dynamic mode
-    Supporting EN50494, EN50607 and dHello® DiSEqC protocols in dynamic mode
-    Up to 32 transponders in static mode per 2 outputs
-    Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
-    Supplied from STB

GT-SAT

TEL.: +352 26 43 22 03

FAX.: +352 26 43 22 04

16, RUE MILLEWEE L-7257 HELMSANGE WALFERDANGE, LUXEMBOURG

© 2020 GT-SAT INTERNATIONAL

  • Facebook
  • Instagram
  • Twitter
  • LinkedIn