®
-
Satellite signal distribution using single cable
-
Perfect solution for multi-dwelling installation
-
Perfect solution for multi-tuner receivers
-
Up to max. 32 receivers in dynamic mode with access to all transponder on the satellite
-
Up to max. 32 transponders in static mode for unlimited number of receivers
-
Auto-detection and auto-installation with dHello® feature
-
Significant decrease of the new installation costs by lower coax cable usage (up to 80%) (comparing to standard installation)
-
Easy adoption of old installation for increase of the number of users
-
Lowering labor time of new installation
-
Future-proof technology (reprogramming for adoption to the new transponder configuration)
®
-
Dynamic DiSEqC protocol for dynamic UB allocation
-
Settings-free dCSS® receiver installation (plug-and-play)
-
Perfect solution for multi-tuner receivers
-
Up to 32 receivers on single coax cable in dynamic mode
-
Bidirectional communication over coax cable
-
Compliant to DiSEqC 2.0 receivers
-
Auto-detection and auto-installation
-
Lowering labor time of new installation
®
Fig. 1 - dConfigurator® Software
ADVANTAGES
-
Satellite signal distribution using single cable
-
Up to 24 Receivers in Dynamic Mode with access to all transponders on satellite
-
Up to 32 Receivers in Static Mode with access to all transponders on satellite
-
Auto-detection and auto-installation with dHello® feature
-
Significant decrease of the new installation costs by lower coax cable usage (up to 80%)
-
Easy adoption of old installation to increase the number of users
-
Lowering time of new installation
-
Future-proof product (reprogramming LNB for adoption to new transponder configuration)
OUR :
- 1 Input for terrestrial antenna (signal from LNB can be distributed along with terrestrial one)
- 1 dCSS® output
- 24 User Bands
- Static and dynamic mode
- Supporting EN50494, EN50607 and dHello DiSEqC protocols in dynamic mode
- Up to 32 transponders in static mode
- Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
- Only 4.5W of power consumption
- Very low Noise Figure (0.1 dB)
- 1 Input for terrestrial antenna (signal from LNB can be distributed along with terrestrial one)
- 1 Hybrid output (legacy or dCSS®, switched on first DiSEqC command reception)
- 1 dCSS® output
- 32 User Bands (shared among 2 outputs)
- Static and dynamic mode
- Supporting EN50494, EN50607 and dHello® DiSEqC protocols in dynamic mode
- Up to 32 transponders in static mode
- Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
- Only 4.5W of power consumption
- Very low Noise Figure (0.1 dB)
Fig. 1 - dCSS® Mode
Fig. 2 - Legacy Mode
- 1 dCSS® output
- 1 (GT-S1dCSS24), 2 (GT-S2dCSS24) or 3 (GT-S3dCSS24) legacy outputs (for receivers not supporting dCSS®)
- 24 User Bands
- Only dynamic mode
- Supporting EN50494, EN50607 and dHello® DiSEqC protocols
- Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
- Very low Noise Figure (0.1 dB)
Fig. 1 - GT-S1dCSS24
Fig. 2 - GT-S2dCSS24
Fig. 3 - GT-S3dCSS24
- 1 dCSS® output only
- 24 User Bands
- Only dynamic mode
- Supporting EN50494, EN50607 and dHello® DiSEqC protocols
- Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
- Very low Noise Figure (0.1 dB)
®
ADVANTAGES
-
Perfect solution for multi-dwelling installation
-
Up to 24 receivers in dynamic mode per output with access to all transponders on the satellite
-
Up to 32 transponders in static mode for unlimited number of receivers per output
-
Auto-detection and auto-installation with dHello® feature
-
Significant decrease of the new installation costs by lower coax cable usage (up to 80%)
-
Easy adoption of old installation for increase of the number of users and/or satellites
-
Distribution of 1 or 2 satellites using only 4 cables (no change in internal installation)
-
Lowering time of new installation
-
Future-proof product (reprogramming LNB for adoption to new transponder configuration)
Fig. 1 - dConfigurator® Software
OUR :
- 4 inputs for 1- or 2-satellite (Wide Band) configuration
- 1 Input for terrestrial antenna (signal from LNB can be distributed along with terrestrial one)
- 5 outputs for cascade connection
- 2 Hybrid output (legacy or dCSS®, switched on first DiSEqC command reception)
- 32 User Bands (shared among 2 outputs)
- Static and dynamic mode
- Supporting EN50494, EN50607 and dHello® DiSEqC protocols in dynamic mode
- Up to 32 transponders in static mode
- Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
- Supplied from external Power Supply Unit
- 4 inputs for 1- or 2-satellite (Wide Band) configuration
- 1 Input for terrestrial antenna (signal from LNB can be distributed along with terrestrial one)
- 5 outputs for cascade connection
- 4 Hybrid output (legacy or dCSS®, switched on first DiSEqC command reception)
- 64 User Bands (32 User Bands shared among 2 outputs)
- Static and dynamic mode
- Supporting EN50494, EN50607 and dHello® DiSEqC protocols in dynamic mode
- Up to 32 transponders in static mode per 2 outputs
- Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
- Supplied from external Power Supply Unit
- 2 inputs for 1-satellite Wide Band configuration
- 1 Input for terrestrial antenna (signal from LNB can be distributed along with terrestrial one)
- 3 outputs for cascade connection
- 1 dCSS® output
- 24 User Bands
- Static and dynamic mode
- Supporting EN50494, EN50607 and dHello® DiSEqC protocols in dynamic mode
- Up to 32 transponders in static mode per 2 outputs
- Reprogrammable with GT-dC2 dController® programmer and dConfigurator® PC application (Windows XP, 7, 8, 10)
- Supplied from STB
